2 AUDIO INPUTS TO 1 OUTPUT CODE
2 AUDIO INPUTS TO 1 OUTPUT WINDOWS

Supported Audio: PCM2, Dolby Digital 5.1 & DTS 5.

Connect the adapter to the converter and a power outlet. This will route audio straight from the selected audio input, to the selected audio output, without. Inputs are the audio inputs on your interface, both analogue and digital. As shown below, you will be able to choose between 3 different types of audio streams: Inputs, DAW, and Mixes. Then, use an optical cable to connect the audio amplifier to the digital audio output. To assign an output, click on the button next to that output. audio sent to the outputs or internal recorder. Supports compressed 2-channel and multi-channel Dolby Digital and DTS audio signals.Д¬onnect your devices to the two digital inputs of Marmitek Connect TS21 using an optical audio cable. Can be set to send AES3 digital signals (1,2 and 3,4 on L and.

2 AUDIO INPUTS TO 1 OUTPUT CODE

Supports uncompressed 2-channel LPCM (Linear Pulse Code Modulation) audio signal.

It features a button that allows you to manually switch between toslink input devices or set it to auto detection. The 2x1 toslink audio switch expands the available toslink ports, allowing you to add more devices with optical outputs.

Supports the S/PDIF and Toslink standard. PI Manufacturings 2 port toslink audio switch adds up to 2 additional toslink input ports to 1 toslink output.

With improved 192kHz sample rate for the best sound reproduction.

Perfect if your Audio Amplifier has too few digital audio inputs.

The balanced XLR output is front-panel switch selectable for MIC or LINE level (pro level). 1 + 2 The most common setting for standard stereo audio outputs.

The Optical (Toslink) Digital Audio Switcher can switch two optical digital inputs to a single optical digital output without delay or loss of quality. The 700 Hz oscillator section features two outputs. These are typically used to output surround sound, but can be used to output up to three independent stereo audio mixes in vMix.

You can connect two devices into the ooptical digital inputs and switch them to a single optical digital output without delay or loss of quality! Marmitek Connect TS21 is an optical (Toslink) digital audio switcher. (and I think perhaps this is where my limitation of only two mic inputs might be too.)ДЈ) You may also have to 'Open Volume Mixer' and adjust levels by right clicking on the speaker icon in your system tray.ДЄgain, I'm saying all this from memory, so I might have it all wrong, but it may also give you some ideas.Toslink digital audio switcher 2 Inputs / 1 Output

Here you can define a particular input, or a sound card mix as an input to a particular app (this can get hairy though when switching between programs, from Zoom to OBS for example).Дў) You should be able to configure your audio mix devices somewhat through your sound card controller, in my case I have reasonable control through 'Realtek Audio Control'.

2 AUDIO INPUTS TO 1 OUTPUT WINDOWS

Truthfully, I sort of gave up trying to solve this, and I can't remember everything I tried exactly, however there are some things I think I may not have tried that may help you:ДЎ) You can control/define the input and output devices for any particular app in Windows under: Settings -> Sound -> Advanced sound options: App Volume and device preferences. My log files show errors like this when OBS gets to initializing the third Audio input: : Failed to get initialize audio client: 8007001F Really, I would just like to determine if this is a known (and possibly intentional) limitation of OBS to only mix two audio sources at a time to improve efficiency, or is it some other mis-configuration or hardware issue with my computer that I am having. Now, I know that what I could do, as a fairly simple solution, would be to use another audio processing device outside my computer to combine multiple inputs, but that's not the point.

I know that Windows was recognizing them, and I could get all of them to work independently through OBS by disabling all but two (within OBS), but I could not find a way to get three to be included in the mix at the same time. I spent all day yesterday trying different ways to integrate three and four microphones into my studio mix, but no matter what I tried, I was only ever able to get two working at once.

2 audio inputs to 1 output